Daimler 1885 Grandfather clock engine

A  key step on the way to the four-wheeled automobile.                                                                            Gottlieb Daimler and Wilhelm Maybach invented this engine in 1885. This model is 1:3 replica of the original , works with gasoline and only 32 cm in height.Casting kit is from Classic Motors - Heinz Kornmüller from Austria. It took 5 months to finish the engine as there are plenty of brass parts to be built. Daimler used this engine on the world's first motorbike they invented (picture attached.)

                          

                             

Epicyclic Steam Engine. It incorporates a spur gear that revolves inside an internal tooth gear.

Made from scrap brass and bronze. Working steam engine.

Plans from Bill Reichart.

http://youtu.be/U8eLpFkaamw

CHRIS CRAFT 1949 RACING RUNABOUT

Scale : 1/8

Length : 72 cm

Beam : 23 cm

Plank over frame with fiberglass application.

Remote control model - Dumas Kits

STUART TWIN Oscillator

This is a double acting steam engine with reverse gear.

Its height is only 6,2 cm.

WEBSTER gas engine

This single cylinder 4 stroke gas engine is made from scrap of aluminium,steel,brass and bronze.
Only the carburator is ready made and the fuel tank is my own design.

Plans are available on the web.
http://home.comcast.net/~webster_engines/

Jo Webster,the designer of the engine says that it is an -easy to build- engine but I do not agree with him as it took a lot of hours for me to finish it.

OCEANIC Cabin Cruiser

Plank on frame construction R/C model boat.

Plank on frame construction R/C model boat by New Maquettes.

Scale : 1:32  Length : 62cm    Beam : 15cm

WISCONSIN AENL

This is a 1957 model wisconsin AENL engine,bought from a farmer,in a bad condition and restored in 3 months.
I have only changed the original color of the engine.
You will see all details in below video.

Single Cylinder Steam Engine

click the video below to see what this tiny engine is able to do...

LITTLE KATHY

A steam engine of 1920's. Castings by Tiny Power.

FELIX

Hamburg harbour launch of the 1960's. Used as a working and transport boat, they are often used to ferry visitors around the harbour.

This remote control model has an ABS hull.

Scale 1/25 Length : 64cm Beam : 15cm.

FANTAIL LAUNCH

A pleasure steam boat of 1890.

This is a remote control model by Midwest operated by a small steam engine and boiler.

Scale 1/12 Length : 49cm Beam : 20

ZEESCHOUW

A 1914 Dutch yacht by Billing boats.


Scale 1/22 Length : 50cm Beam : 15cm.

HMS VICTORY's LIFEBOAT

A scale model of the type of sloop that was carried aboard Admiral Lord Nelson’s flagship HMS Victory.

Scale : 1/16 Length : 62cm. Beam : 20cm.

VAPORETTO

Venician passenger motor boat that has been operational in Venice since 1965.

This Mantua model kit is also an R/C boat.
Scale 1/28 Length : 83 Beam : 18

HELLEN

A typical English coastal fishing boat.

This remote control model boat, by Artesania Latina has an ABS hull.

Scale 1/20 Length : 85cm Beam : 24cm

BERLIN

A modern rescue ship operated by the German Association for the Rescue of the Shipwrecked (DGzRS).

This remote control model boat by Robbe is a multifunction type equipped with fire monitors,daughter boat Steppke,cable winch and wide range lighting system.  I have built this kit in 2 years.

Scale 1/25 Length : 110cm Beam . 26cm

Two cylinder steam engine.

This engine is made from scrap.  PM Research boiler behind.

https://www.youtube.com/watch?v=Fi0jc-ZLB_g

http://youtu.be/Fi0jc-ZLB_g

CALYPSO

 

An old minesweeper bought by Captain Jacques Yves-Cousteau in 1950 and turned to a fully equipped ocean research vessel.

A remote control model by Billing Boats - ABS Hull

Scale : 1/45 Length : 94cm Beam : 17cm

BOULOGNE ETAPLES

 

A stern trawler that still operates along the French Channel.

A remote control model by Billing Boats - Plank on frame construction.

Scale 1:20 Length 56cm. Beam 20cm.